Cleaning and care
Descaling
Tips for use
Settings
Descaling must be carried out and takes
approx. 20 minutes.
Calling and changing portion sizes in
the "Parameters" menu
Cleaning the milk pipework
Degreasing the brew unit
Changing the portion size
Profiles
Changing settings
ĺ Tap "Settings".
ĺ Change the setting using the arrow keys.
The milk pipework must be cleaned with
the original Miele cleaning agent for milk
pipework. Cleaning takes approx. 7 minu-
tes.
After 200 portions have been dispensed,
"Degrease the brew unit" will appear in the
display. This message will not go out until
the brew unit has been degreased.
The changed portion size is always saved
in the current profile. The name of the cur-
rent profile is shown in the top left of the
display.
You can create profiles and save the por-
tion sizes for Espresso, Coffee and Long
Coffee for each profile.
ĺ You will need 2 descaling tablets.
ĺ Tap .
ĺ Tap the OK button to save the setting.
ĺ Select the required setting with the arrow
keys and confirm with OK.
ĺ Select the desired drink and confirm
with OK.
The cleaning process cannot be cance-
led once it has started. The process has
to be carried through to the end.
Options which are currently selected will
have a check next to them.
Tapping takes you back to the previous
menu.
Quick Start Guide
Built-in Coffee System
You need one sachet of the Miele cleaning You need 1 Miele cleaning tablet to de-
agent for milk pipework.
ĺ Select "Portion size" and tap the OK but-
ton.
Changing the portion size during drink
preparation
grease the brew unit. The process takes
approx. 10 minutes.
ĺ Tap and select "Maintenance" and
then "Descale the appliance."
Then tap the OK button.
From this point onwards, the procedure is
identical to programming the portion size
during drink preparation.
The cleaning process cannot be cance-
led once it has started. The process has
to be carried through to the end.
ĺ Place the desired cup under the main
dispenser.
The cleaning process cannot be cance-
led once it has started. The process has
to be carried through to the end.
The descaling process will now start.
ĺ Tap and hold the button for the desired
drink until "Change" appears in the dis-
play.
ĺ Follow the instructions in the display.
Setting the portion size for different
profiles
ĺ Tap and select "Maintenance" and
then "Clean milk pipework."
Then tap the OK button.
The name of the current profile is shown in
the top left of the display.
Menu item
Available settings
Comments
ĺ Tap and select "Maintenance" and
then "Degrease the brew unit."
Then tap the OK button.
Language
German, English, other languages
Country
If you want to change portion sizes for
Cappuccino, Latte macchiato or Caffè lat-
te, the ingredients will be shown in the dis-
play.
ĺ Tap "Profile" and select the profile you
want.
If you select the wrong language by mistake, you can find the "Language" option by following the
symbol.
The cleaning process will start.
Accessing a profile
The process will start.
ĺ Follow the instructions in the display.
Time of day
Display (On / Off / Night dimming)
Clock format (12 h / 24 h)
Depending on which option you select, the machine may use more energy. A message about this will
appear in the display.
Now you can either set the portion size
by selecting "Portion size" in the "Parame-
ters" menu or set it while making a drink.
ĺ Tap "Profile".
ĺ Follow the instructions in the display.
Set
When "Place a cleaning tablet in the ground
coffee chute and close" appears in the dis-
play:
Creating a profile
Cappuccino Milk froth, espresso
Date
Year / Month / Day
Latte
macchiato
Hot milk, milk froth, es-
presso
Timer
Timer 1 (Turn on at, Turn off at, Turn off after)
Timer 2 (Turn on at, Turn off at)
Enter
characters
Select with the
arrows + OK
For "Turn on at" and "Turn off at" to be set, the timer must be activated and at least one day of the
week must be allocated.
Caffè latte
Hot milk, coffee
ĺ Fill the water container with lukewarm
water up to the symbol and drop 2 de-
scaling tablets in it. Push the water cont-
ainer back into the machine.
Save
entry
Select with the
arrows + OK
Eco mode
Lighting
On / Off
ĺ Select all ingredients for which you wish
to alter the portion size. Use the OK but-
ton to confirm your individual selections.
Brightness (machine turned on or turned off)
Turn off after
Delete characters
Button
To turn off the lighting, tap the arrow key until no segments are filled and "Turned off" appears.
Follow the instructions on the packet for
the mixing ratio carefully. It is import-
ant that you fill the water container with
the correct amount of water (not less or
more), otherwise descaling will be cut
short and must then be repeated. The
descaling program will otherwise be
canceled prematurely and will need to
be repeated.
ĺ Fill the water container with lukewarm
water up to the symbol and add 1
sachet of the Original Miele cleaning
agent for milk pipework. Push the water
container back into the machine.
ĺ Use the arrow keys to highlight "Start".
Then tap the OK button.
Info
Number of drinks
"No. of portions until appliance needs descaling" / "No. of portions until brew unit needs degreasing"
If you have already created a profile, the
following options are available to you:
The drink will be prepared and "Save" will
appear in the display.
System lock
On / Off
When the system lock is activated, the "Turn on at" option for the timer cannot be selected.
ĺ Remove the coffee chute cover and
open the lid of the coffee chute. Place a
cleaning tablet in the coffee chute.
– Select profile
– Change name
– Delete profile
Water hardness
Display brightness
Volume
Soft, medium, hard, very hard
Set
When the quantity for each ingredient re-
aches the level you want, tap the OK but-
ton.
When "Rinse and refill the water container"
appears in the display:
ĺ Follow the further instructions given in
the display.
Signal tones
Keypad tones
To turn off the tones, tap the arrow key until no segments are filled and "Turned off" appears.
– Change profile
ĺ remove the water container and rinse it
carefully with clean water.
ĺ Save the required portion size for the
selected ingredients.
(The coffee machine changes the profi-
le manually, after a drink is dispensed, or
when the machine is turned on.)
The degreasing process is finished when
"Process complete" appears in the display.
Showroom program
Factory settings
Demo mode (On / Off)
Intended only for presentations in stores. For private use, this function is not required.
This quick guide is not a substitute for the Operating and Installation Instructions. It
is essential to read the operating and Installation Instructions to familiarize yourself
with how to use the coffee machine before using it for the first time. For this reason,
read the Operating and Installation Instructions carefully while paying particular at-
tention to the IMPORTANT SAFETY INSTRUCTIONS.
When "Rinse the water container and fill with
fresh tap water up to the descaling sym-
bol " appears in the display,
Ensure that no cleaning agent is left in
the water container.
The programmed composition and the
portion size will now be dispensed every
time that particular drink is selected.
Reset
Do not reset
The cleaning process is finished when
"Process complete" appears in the display.
ĺ remove the water container and rinse it
carefully with clean water.
Mains water
On / Off
(Only for CVA 6405)
Tip: You can cancel portion size program-
ming as long as "Stop" is visible in the dis-
play.
Ensure that no descaling solution resi-
due remains in the water container.
The descaling program is finished when
"Process complete" appears in the display.
en - US, CA
M.-Nr. 09 741 530
|