WD-8198B
Revised 03-06
Catalog Section 30
(00-02-0088)
Swichgage® Kits for Engines
WD100 Series
• Universal Mounting
Panel
• Guard against low oil
pressure or high
running temperature
• For farm or
construction
equipment
WD185
Engine Kit
Description
Kit Combinations
These kits are available for virtually any engine application, any
engine type, or can be custom ordered to meet a specific use.
The WD100 Series Swichgage kits provide engine monitoring that
shuts down farm, construction, or other engine powered
equipment, when dangerous pressures or temperatures occur. Kit WD100 includes: A, and B
The control center for each of these kits is the compact and Suitable for use on distributor ignition engines or on diesels
adjustable, Universal Mounting Panel. This panel holds two having a shutdown solenoid in the fuel pump.
®
Shipping Weight: 4.75 lbs (2.2 kg)
Swichgage(s) and a Tattletale magnetic switch, and shut down
Shipping Dimensions: 9-3/4 in. x 9-1/4 in. x 5-3/4 in. (248 mm x 235 mm x 146 mm)
device where appropriate.
Kit WD150 includes: A, B, C, and E
Specifications
Suitable for most liquid cooled diesel engines.
Shipping Weight: 6.15 lbs (2.8 kgs.)
• Murphy Swichgage products are two-instruments-in-one: (1) an
Shipping Dimensions: 9-3/4 in. x 9-1/4 in. x 5-3/4 in. (248 mm x 235 mm x 146 mm)
accurate indicating gauge with (2) a built-in, adjustable, limit switch.
Kit WD175 includes: A, B, C, and E
• 518PH Tattletale magnetic switch is designed to shut down
engines; operates as a circuit breaker to interupt the ignition circuit
to a distibutor or to close a solenoid fuel valve on diesels.
Suitable for air cooled diesel engines; 10 mm 1.5 adaptor and
special head temperature bulb. Includes SV-Series fuel valve.
Shipping Weight: 6.15 lbs (2.8 kgs.)
•Temperature capillary tubes are 6 ft. (1.8 m) standard, but can
Shipping Dimensions: 9-3/4 in. x 9-1/4 in. x 5-3/4 in. (248 mm x 235 mm x 146 mm)
be ordered in any length.
Kit WD185 includes: A, B, C, D, and E
*
•Standard Swichgage ranges :
Suitable for engines with gear driven transfer pump. (SV-Series is
not required on engines with built-in shutdown in the injector
Pressure: 0-100 psi (0-689 kPa) [0-6.89 bar]
Temperature: 100-250°F (37-121°C)
pump.)
Shipping Weight: 6.20 lbs (2.8 kgs.)
*Other ranges are available on request.
Shipping Dimensions: 9-3/4 in. x 9-1/4 in. x 5-3/4 in. (248 mm x 235 mm x 146 mm)
WD100 Series Kits
Depending upon the kit selected, the following components are
supplied:
A Universal Mounting Panel which consists of:
• 20P, oil pressure Swichgage instrument
• 20T, temperature Swichgage instrument with 6 ft. (1.8 m)
capillary, or 20TH, temperature Swichgage instrument for
WD175 kit.
A
E
• 518PH Tattletale magnetic switch
B
B Bracket mounting bolts, washers and nuts.
C CKV2336, fuel reverse flow/check valve.
D PRV50, fuel pressure relief valve
D
E SV-Series, fuel shut-off solenoid valve (1/4 NPT X 1/4 NPT)
C
Specify 12VDC or 24VDC.
—Especially designed for adaption to a wide variety of engines.
WD-8198B page 1 of 2
|