Welcome to the world of Home Theater.
This remote control is the key to your home theater experience.
Remote Control Operation Guide
Model No. EUR7722KM0
First,
turn on the receiver.
Page 2
Page 4
Now, you can operate
other Home Theater
components.
Page 2
Page 4
You may need to enter
a code to operate
some equipment.
Page 3
Page 5
Page 6
P PC
RQT7999-P
H0405WM0
DVD RECORDER
Watching DVDs
Switch on
Operating the DVD recorder
Select drive
Switch on the television
and select input
If it does not change
After performing the following
operations, press this button again.
Switch on the recorder
and start play
1. Press [DVD RECORDER].
2. While pressing [ENTER], press and
hold [8] for approximately
2 seconds.
Switch off
To return
In step 2 above, while pressing [ENTER],
press and hold [9] for approximately
2 seconds.
Operating the DVD recorder
The factory setting is [9].
When using a Panasonic
DVD recorder
Clear the menus or return to
the previous menu
Change the unit’s remote control code to
match the remote control code of the DVD
recorder.
Show disc menus
Show recorder
menus
Select and enter
menu items
Preparations: Check the remote control
code of the DVD recorder.
Stop play
For about one second press [ENTER] and
the button ([1], [2] or [3]) which is the same
number as the remote control code set by
the DVD recorder.
Skip items during play
Search through the disc
Pause play
The factory setting is [1].
Start slow-motion play
Start play from a selected item
To view frame-by-frame
3
VCR
CD PLAYER
Listening to CDs
Watching videotapes
Switch on
Switch on
Switch on the television and select input
Switch on the player and start play
Switch off
Switch on the player and start play
Operating the CD player
Switch off
Start play from
a selected track
Operating the video deck
Specify a disc
[3- or 5-disc changer]
Stop play
Change the channels
sequentially
Start play from a specified disc
[MEGA CD changer] (holds more than 50 discs)
Pause play
Stop play
Skip tracks during play
Pause play
Select the channel
directly
Rewind or fast-forward
(Press and hold)
Search through the disc
Download from Www.Somanuals.co4m. All Manuals Search And Download.
RECEIVER
Listening to the radio
Adjusting speaker
channel balance
Switch off
Select FM or AM
(Press and hold)
Start a test signal
Operating the radio
Select the speaker
channel and adjust
its output level
Change the preset
channels sequentially
Stop the test signal
Other functions
To mute the volume
Select the preset channel directly
Select radio stations by frequency
DOLBY PRO LOGIC x MODE
Select MOVIE (DOLBY EX), MUSIC or
GAME when Dolby Pro Logic x mode
or Dolby Pro Logic mode is on
To cancel
Change
the sound effect
When you select MUSIC
To adjust the volume
DTS NEO:6 MODE
Select a DTS NEO:6 mode:
CINEMA or MUSIC
To cancel
To select
DVD ANALOG 6CH
Change
the sound effect
When you select MUSIC
(Press and hold)
To adjust subwoofer
output level
SFC MODE
Select an SFC mode
To cancel
Dim the display
Select the speaker channel
and adjust its output level
For selecting
a re-master mode
Change the sound effect
Download from Www.Somanuals.co5m. All Manuals Search And Download.
CODES
This remote control can operate Panasonic and Technics audio-visual equipment that has remote control sensors.You may need to change the remote
control code.
It can also operate some other brands of televisions, video cassette players, and DVD players. Check the table for the brand and enter the code as follows.
Changing the codes
The remote control outputs the on/off signal.
If the code is correct, the equipment
turns on or off.
DVD
player
TV
VCR
If it doesn’t, try entering another code.
Press and hold the button
corresponding to the equipment
Enter the first digit
Enter the second digit
Note that this remote control cannot operate some equipment and that it may not be able to perform some operations.
Re-enter the codes after you change the batteries.
6
|